Remington BV12200A, BV1220DAT Bedienungshandbuch PDF herunterladen (Seite 9)

REMINGTON ELECTRIC BLOWER/VAC | 5

Follow the steps below to convert from

blower to vacuum. IMPORTANT: The

vacuum will not run unless the vacuum

tube assembly is locked into place.

1. Press locking lever on bottom inlet

cover and remove bottom inlet cover

from blower/vac. Remove blower tube

from blower/vac.

2. Slide vacuum tube adapter onto outlet

on front of blower/vac housing (see

Figure 3-6). Securely connect the

draw latch to the vacuum bag adapter

(see Figure 3-7).

3. Connect the lower and upper vacuum

tubes together (see Figure 3-8). Align

the ridge on the bottom tube with

the channel on the top tube. Press

together until you hear a “snap”.

Figure 3-6: Sliding vacuum tube adapter into place

Converting from

Blower to Vacuum

WARNING: To Reduce The

Risk of Personal Injury or Electric

Shock – Disconnect from power

source before assembling or

changing attachments.

Figure 3-8: Conntecting lower and upper vacuum tube

together

Figure 3-7: Connect draw latch to vacuum bag adapter

120133

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Keine Kommentare

Remington BV12200A, BV1220DAT Bedienungshandbuch Seite 9