Remington HEDGE WIZARD 110946-01 Bedienungshandbuch PDF herunterladen (Seite 5)

5

110939

OWNER’S MANUAL

For more information, visit www.desatech.com

STARTING THE POLE

TRIMMER

The Pole Trimmer has a trigger lock button

located on top of the handle. This safety

feature locks the trigger in the OFF position,

preventing accidental starting of the Pole

Trimmer.

The trigger lock button has three positions.

Position 1 locks the trigger.

Position 2 allows you to squeeze the trig-

ger and operate the Pole Trimmer. The trig-

ger lock button will automatically spring

back to Position 1 when you release the

trigger.

Position 3 allows you to lock the trigger in

the ON position. This is helpful during con-

tinuous trimming for extended periods

of time.

Note:

An optional method of retaining the

extension cord is shown in Figure 8 for use

with larger-gage cords that may not fit into

the extension cord retainer.

2.

Release the trigger lock button while the

Pole Trimmer is running. The lock but-

ton resets to Position 1 each time you

release the trigger to the OFF position.

Figure 9 - Manually Operating Trigger

with Trigger Lock Button in Position 2

Figure 10 - Trigger in OFF Position with

Trigger Lock Button in Position 1

Trigger Lock

Button Position 2

Trigger Lock

Button Position 1

Figure 7 - Extension Cord Loop Tight

Around Molded Cord Hook

Figure 8 - Optional Method of Retaining

Extension Cord

Figure 6 - Inserting Extension Cord Loop

Through Bottom of Handle

Continued

Unlocking the Trigger to Start

the Pole Trimmer

1. Using your thumb, push the trigger lock

button forward to Position 2. Squeeze

the trigger lever to the ON position. The

Pole Trimmer will start running.

3. Create a loop in the extension cord and

insert the loop through the bottom of

the handle. Pull the loop tight around

the molded cord hook (see Figures 6

and 7).

OPERATING POLE

TRIMMER

Continued

1 2 3 4 5 6 7 8 9 10 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare