Remington BV12199A Bedienungsanleitung PDF herunterladen (Seite 8)

4 |

3 blower/vac assembly

Assembling Blower

Follow the steps below to assemble the

blower. IMPORTANT: You must install the

blower tube before installing the bottom

inlet cover. e bottom inlet cover hooks

onto the blower tube. e blower will not

run unless the bottom inlet cover is locked

into place.

1. Slide the blower tube onto outlet

on front of blower/vac housing (see

Figure 3-1). Make sure the moulded

hook on the blower tube is positioned

below the blower.

2. Position front of bottom inlet cover

over blower tube hook (see Figure

3-2).

3. Pivot bottom inlet cover to bottom

of blower/vac housing. Slightly press

locking lever on bottom inlet cover

to allow cover to lock into place (see

Figures 3-3 and 3-4).

Figure 3-4: Pressing locking lever

WARNING: To Reduce The

Risk of Personal Injury or Electric

Shock – Disconnect from power

source before assembling or

changing attachments.

Figure 3-1: Sliding blower tube into place

Figure 3-2: Attaching bottom inlet cover to

blower tube hook

Figure 3-3: Pivoting bottom inlet cover to

blower/vac housing

118034

1

2

3

4

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare